top of page

PneuVibe Compactor Plates

Australia’s best known and most reliable excavator mounted compactor plates are efficient and safe solution for a wide range of applications, from working in narrow trenches to large backfill operations. With optional Post Clamps you can effectively drive posts from 50mm to 300mm.

For wide range of applications

Whether you’re working in a narrow trench or have a large backfill operation or compacting around tanks, the Pneuvibe Compactor range has a solution.

 

The Pneuvibe Compactor plates can also be modified to drive posts - sheet piling and with a frame be used to compact either side of large pipes.

RotatingImages_PneuVibe_II.jpg

Simple to connect and operate

 

PneuVibe compactor plate can be simply connected to your machine’s existing hydraulics whether your machine is a small backhoe or a large crawler excavator. If you have existing hydraulic hammer piping on your machine connecting the compactor plate is even easier.

Operating is simple as the vibration produced by the rotating eccentric combined with the down pressure of the carrier generates impulse force to be placed wherever your boom will reach.

PneuVibe_CP51_PD1.jpg

Optimum performance and durability

Pneuvibe has been producing excavator mounted plate compactors for over 30 years.

 

Their patented rubber design ensures rubber mounts are in compression whist in operation. This system ensures increased rubber mounts life and minimises vibration transmitted to the boom, thus reducing wear on the excavator’s pins and bushings.

CP250email.jpg
main_pic_with_arrows.jpg
ENGINEERED FOR DURABILITY
  1. PneuVibes patented system ensures increased elastomer life and minimises vibration transmitted to the boom, thus reducing wear on the pins and bushes of the excavator. Rubber vibration mounts are angled to the base so that the pressure exerted by the boom on the top plate causes the mounts to convert from a shear to a compression mode.

  2. Protective cradle prevents the hydraulic motor and hoses being snagged or damaged on trench walls and hoses are covered with an anti abrasion wrap for maximum flexibility and durability.

  3. Direct attachment to existing hydraulic hammer mounting heads saves time and is ideal for use with quick hitch arrangements. A multi-setting, 360º swivel head attachment is also available.

  4. Built-in priority valve system monitors the oil flow, providing the correct volume to obtain maximum performance by the compaction plate and avoiding damage to the hydraulic motor due to excessive flow.

Model
CP15
CP30
CP51
CP100
CP201/250
CP201F
CP301
weight (kg)
105
195
325
490
710
710
890
base plate size(WxL mm)***
285x510
310x670
450X875
590X920
680X1000
680X1000
800X1000
height
350
440
570
610
790
790
810
centrifugal force (kg)
885
1575
2900
3950
8100
8250
10900
frequency
2,500
2500
2300
2300
2300
3000
2100
carrier capacity (t)
1.5-4
1.5-4
3-7.5
3.5-15
12-22
12-22
18-40
min oil flow req (ltr/min)
55/35/20**
55/35/20**
50
70
150/95**
135
150
compaction lift (cm)
15-20
20-50
40-100
60-120
90-150
90-150
120-180
compaction area (m2)
0.15
0.2
0.39
0.54
0.68
0.68
0.8

Contact us to view our range of excavator and skid steer
attachments for your next project.

bottom of page